Ürünler

Anasayfa Ürünler

DV Rüzgar Yön Algılayıcısı

  • Potesiyometrik rüzgar yön ölçümü, doğrusal ve kesin ölçüm
  • WMO standartlarına uygun
  • Kuvvetlendirilmiş alüminyum gövde, kolay taşınabilir ve monte edilebilir
  • Ölçüm aralığı 0 - 359°
  • Çözünürlük: 0.1°C Doğruluk: 1°
  • Hassasiyet < 0.25 m/s
  • Düşük güç tüketimi(< 0.1 W; < 5W@12VDC ısıtıcılı)
  • Yüksek rüzgar direnci
  • Çıkış Sinyali: potensiyometre (10K ohm), 0÷2Vdc, 4÷20mA, RS485/Modbus
  • Çalışma koşulları:-30 ÷ +70°C, 0÷80m/s
  • Güç Kaynağı: 10 ÷ 30Vdc

Sensor for measuring wind direction at low power consumption, also available in a heated version (model DVR), compact and sturdy, made of aluminum alloy with anodized to protect against salt air and oxidizing agents. Extremely linear and precise, with high dynamic response even in strong winds (up to 300 km/h), easy to interface with any data logger. The sensor uses a special high-precision potentiometer that provides excellent resolution, high sensitivity and a remarkable mechanical durability with an operating angle of 360 °. The sensor is equipped with electrical protections and is available with various signal outputs.

VV1 First Class Rüzgar Hız Algılayıcısı

  • Yüksek doğrulukta rüzgar hız ölçümü (< 0.1 m/s)
  • Kalibrasyonlar: Rüzgar Tüneli MeasNet and ACCREDIA
  • Kategori: IEC 61400-12-1 ve "First Class" , Class A 1.96, Class B 3.05 Class S 2:42
  • WMO Standartlarına uygun
  • Bilyalı rulman rotoru ile yüksek performans (MIL-L-6085 C)
  • Düşük enerji tüketimi(< 0.1W; < 5W@12VDC ısıtıcılı)
  • Ölçüm Aralığı: 0.28 ‘den 50m/s (0 ...150 Hz) ‘ye 100m/s’ye kadar
  • Doğrusallık: R> 0.99998 < 0.02 m/s standart hata payı ile
  • Çıkış sinyali: (150Hz), 4-20mA, 0÷2Vdc veya dijital RS485/Modbus
  • Çalışma koşulları: -10 ÷ +70° C, ısıtıcılı tipi -35 ÷ +70°C, 0 to 100m/s

Sensor "First Class" to measure the wind speed at low power consumption also available in a heated version (model VV1R), compact and sturdy, made of aluminum alloy with anodized to protect against salt air and oxidizing agents. Extremely linear and precise, with high dynamic response even in strong gusts, easy to interface with any data logger. The sensor uses specific arrangements including special self-lubricating bearings, which allow the MeasNet certification and make it ideal for Eolic monitoring applications (Wind power), guaranteeing maximum performance. The sensor is equipped with electrical protections and is available with various signal outputs.

ANESB Biaxial sonic anemometer (x,y)

ANESBR Biaxial heated ultrasonic anemometer (x,y)

  • Rüzgar hızı ve yönü ölçen ultrasonik sensör
  • Hareketli herhangi bir parçası bulunmaz
  • Soğuk şartlarda kullanılmak için entegre ısıtıcı sistemine sahip
  • Zorlu ortamlarda kullanılmak üzere tasarlanmış sağlam yapı
  • Ölçüm aralığı: 0÷60m/s (hız), 0÷359 ° (yön)
  • Çözünürlük: 0.01 m/s (hız), 1° (yön),
  • Doğruluk: ± 2%
  • Düşük güç tüketimi (maksimum ~10W ısıtcı açıkken)
  • Çıkış sinyali: ÷20mA, veya RS485/Modbus
  • Çalışma şartları -40 ÷ +80°C
  • Güç kaynağı: 10÷30Vdc

Ultrasonic sensor for the measuring speed and wind direction with heating, capable of measuring the characteristics of the wind along two orthogonal axes X, Y on the horizontal plane and their cartesian result. Made of resin and aluminum anodized alloy; the heating of the transducers expands the standard range of operation and ensures measurements in adverse weather conditions. Linear, accurate and extremely reliable in all conditions, high dynamic response. Easy to interface with each data logger. The sensor is equipped with electrical protections and is available with various signal outputs.

FAT Hava Akış Algılayıcısı (0 ÷ 5m/s)

  • Hava akışını yüksek hassasiyette ölçen algılayıcı (< 0.01 m/s)
  • Range: 0÷5m/s (flow), -20 ÷ +80°C (temperature)
  • Accuracy: ± 0.02 m/s (temperature compensated from 0÷80°C) ± 0.3°C
  • Omnidirectional
  • Output signal: dual 4÷20mA output (0÷2Vdc, RS485 or Modbus on request with double MCS module)
  • Operating conditions: -30 ÷ 110°C
  • Power supply: 10 ÷ 30Vdc (typ. < 0.5W)

Sensor for the measurement of the air flow with hot wire omnidirectional probe that allows to obtain both the measurement of air speed and the temperature. Thanks to the different types of standard electrical outputs (voltage and current), or digital RS485 with ModBus protocol (option MCS), allows it to be easily interfaced with any acquisition system.

ANEST Triaxial sonic anemometer (x,y,z)

  • Rüzgarı x, y ve z eksenlerinde ölçen ultrasonik algılayıcı
  • No moving parts, low maintenance and service costs.
  • Robust construction, suitable for continuous operation even in harsh environmental conditions
  • Typical range: up 0÷60m/s (speed), 0÷359 ° (direction),
  • Resolution: 0.01 m/s (speed), 1° (direction), temperature compensated
  • Accuracy ± 2% of reading
  • Low power consumption (< 2.5 W @ 12VDC, 6W with heater)
  • Output signal: 0÷20mA or 4÷2Vdc
  • Operating conditions: -40 ÷ +60°C (with heater)
  • Power supply: 12÷30Vdc

Triaxial ultrasonic sensor for measuring the speed and direction of the wind and sonic component (temperature and speed of sound), capable of measuring the characteristics of the wind along the three orthogonal axes x, y, z and their Cartesian resulting . Robust construction made of resin and anodized aluminum alloy. Linear, precise and extremely reliable in all conditions, high dynamic response. Easy to interface with each data logger. The sensor is equipped with electrical protections and is available with various signal outputs

DV Kablosuz Rüzgar Yön Algılayıcısı

  • Potesiyometrik rüzgar yön ölçümü, doğrusal ve kesin ölçüm
  • Instrument according to standard WMO
  • Aluminum sturdy, compact and easy to install
  • Typical measuring range: 0÷359°
  • Resolution: 0.1°C, accuracy: 1°
  • Sensitivity < 0.25 m/s
  • High dynamic response to wind
  • Wireless data transmission with ZigBee protocol
  • Operating conditions: -30 ÷ +70°C, 0÷80m/s (burst)
  • Battery life: (>2 years)

Wireless sensor for measuring wind direction with standard ZigBee protocol, compact and sturdy, made of aluminum alloy with anodized to protect against salt air and oxidizing agents. Extremely linear and precise, with high dynamic response even in strong winds (up to 300km/h), easy to interface with any data logger. The sensor uses a special high-precision potentiometer that provides excellent resolution, high sensitivity and a remarkable mechanical durability with an operating angle of 360 °. Totally immune to electric shocks and disturbances of any type.

VV1W First Class Kablosuz Rüzgar Hız Algılayıcısı

  • Yüksek doğrulukta rüzgar hız ölçümü (< 0.1 m/s)
  • Calibrations: wind tunnels MeasNet and ACCREDIA
  • Classification according to IEC 61400-12-1 and "First Class" , Class A 1.96, Class B 3.05 Class S 2:42
  • Instrument according to standard WMO
  • Rotor with high performance ball bearing (MIL-L-6085 C)
  • Low power consumption (< 0.1W; < 5W@12VDC with heater)
  • Typical measuring range: 0,28 to 50m/s (0 ...150 Hz) up to 100m/s
  • Linearity: R> 0.99998 with a standard error of < 0.02 m/s
  • Output signal: pulses (150Hz), 4÷20mA, 0÷2Vdc or digital RS485/Modbus
  • Operating conditions: -10 ÷ +70° C, to 100m/s (burst)
  • Wireless data transmission with ZigBee protocol
  • Battery life: (>2 years)

Wireless "First Class" sensor to measure the wind speed at low power consumption also available in a heated version (model VV1R), compact and sturdy, made of aluminum alloy with anodized to protect against salt air and oxidizing agents. Extremely linear and precise, with high dynamic response even in strong gusts, easy to interface with any data logger. The sensor uses specific arrangements including special self-lubricating bearings, which allow the MeasNet certification and make it ideal for Eolic monitoring applications (Wind power), guaranteeing maximum performance. Totally immune to electric shocks and disturbances of any type.

TA Hava Sıcaklık Algılayıcısı Pt100 - 1/3DIN
TAV Havalandırma Sistemli Hava Sıcaklık Algılayıcısı Pt100 - 1/3DIN

  • Air temperature sensor accurate and reliable with a 4-wire Pt100 1/3DIN
  • According to WMO standards and with Pt100 platinum resistance
  • Anticorodal Aluminum body with size and weight compact
  • Available with forced ventilation (model TAV)
  • Range: -40 ÷ +60°C
  • Resolution: 0.01°C
  • Accuracy: DIN 43760 1/3DIN (±0.1°C) certified
  • Response time: < 10s
  • Operating conditions: -60 ÷ +80°C
  • Output signal: Pt100 (100Ω @ 0°C), 0÷2Vdc, 4÷20mA, Digital RS485/Modbus
  • Power supply: 10÷30Vdc (consumption with forced ventilation 2Wmax@12Vdc)

Sensor for the measure of air temperature at high precision and reliable, compact and sturdy, made of aluminum alloy with anodizing treatment for protection against salt and oxidizing agents. Fully compliant to WMO Annex.8 for environmental monitoring applications. Extremely fast response time (<10s). Easy to install and to interface to any data logger (4-wire). Available with certification ACCREDIA. The sensor is equipped with electrical protections and is available with different signal outputs and with forced ventilation.

TT Toprak Sıcaklık Algılayıcsı

  • Soil temperature sensor with a 4-wire Pt100 1/3DIN
  • According to WMO standards
  • Compact and light design in stainless steel
  • Measure Range: -40 ÷ +60°C
  • Sensibility: 0,01°C
  • Accuracy: ≤ 0,1°C
  • Response time: < 15s
  • Operating conditions: -60 ÷ +100°C
  • Output signal: Pt100 4 wires, (0÷2Vdc, 4÷20mA, Digital RS485/Modbus with MCS option on request)

Sensor for measuring soil's temperature, for agro-meteorological applications and generic environmental measures. Compact and sturdy, made of stainless steel. Easy to interface to any data logger. Available in different lengths. Easy to interface with any data loggers able to read Pt100.

TQ Su Sıcaklık Sensörü

PL400 Yağış Algılayıcısı 400cm2 toplama alanı
PL400R Yağış Algılayıcısı 400cm2 toplama alanı ısıtıcılı

  • Sensor for measurement of precipitation with a knife blade support for tilting bucket
  • Class A accuracy according to UNI11552:2012
  • According to WMO, surface collection: 400cm2
  • Aluminium body white painted, sturdy and compact, stainless steel tilting bucket
  • Measuring range: 0÷300mm/h
  • Sensitivity: 0.2 mm (bucket capacity), 0.1mm on request
  • Instrumental constant: 0.2mm/pulse
  • Average accuracy ± 2% (± 0.10mm/min) (± 1% on request)
  • Output signal: pulse/tilt
  • Operating conditions: 0 ÷ 80°C (-40 ÷ +80°C heated version)
  • Power supply: 10÷30Vdc (24Vac 30W heated version)

Sensor in A Class, according to UNI11452:2012 for the measurement of precipitation with collection surface of 400cm2, realized in aluminum alloy with anodizing treatment for protection against salt and oxidizing agents. According to WMO norms for environmental monitoring. Measurement system with knife blade support for tilting bucket in stainless steel with a special system to reduce friction, for ensuring high accuracy over the entire measuring range. A particular system of testing and calibration guarantees the functionality of the instrument for long time.

PL1000 Yağış Algılayıcısı 1000cm2 toplama alanı
PL1000R Yağış Algılayıcısı 1000cm2 toplama alanı, ısıtıcılı

  • Sensor for measurement of precipitation with a knife blade support for tilting bucket
  • Class A accuracy according to UNI11552:2012
  • According to WMO, surface collection: 1000cm2
  • Aluminium body white painted, sturdy and compact, stainless steel tilting bucket
  • Measuring range: 0÷300mm/h
  • Sensitivity: 0.2 mm (bucket capacity), 0.1mm on request
  • Instrumental constant: 0.2mm/pulse
  • Average accuracy ± 2% (± 0.10mm/min) (± 1% on request)
  • Output signal: pulse/tilt
  • Operating conditions: 0 ÷ 80°C (-40 ÷ +80°Cheated version)
  • Power supply: 10÷30Vdc (24Vac 50W heated version)

Sensor for the measurement of precipitation with collection surface of 1000cm2, realized in aluminum alloy with anodizing treatment for protection against salt and oxidizing agents. According to WMO norms for environmental monitoring. Measurement system with knife blade support for tilting bucket in stainless steel with a special system to reduce friction, for ensuring high accuracy over the entire measuring range. A particular system of testing and calibration guarantees the functionality of the instrument for long time.

BAR Basınç Algılayıcısı

  • Sensor for measurement of atmospheric pressure with high precision
  • Small dimensions and weight with IP65 protection
  • Conforms to WMO's standard
  • Measuring range: 800 ÷ 1.100 hPa
  • Resolution: 0.05 hPa
  • Accuracy: 0.4 hPa
  • Low power consumption (< 0.1 W)
  • Output signal: 0÷2Vdc, 4÷20mA
  • Operating conditions: -40 ÷ +80°C
  • Power supply: 10÷30Vdc

Sensor for the measurement of atmospheric pressure with low consumption, in IP65 enclosure, compact and very accurate. Measure between 800hPa and 1100hPa with a typical accuracy of 0.3hPa and a response time of less than 2 sec (different ranges and accuracy on request). Easy to interface with any data logger. The sensor is equipped with electrical protections and is available with different output signals.

BAR-QNH Havacılık uygulamaları için Basınç algılayıcısı

  • Sensor for measurement of atmospheric pressure with calculation of the integrated QNH
  • Specific application for airports
  • Includes interface module and MCS RS485/Modbus for setting altitude
  • Automatic calculation of QNH
  • Small dimensions and weight with IP65 protection
  • Conforms to standard WMO
  • Measuring range: 500÷1.100 hPa
  • Resolution: 0.05 hPa
  • Accuracy: 0.4 hPa
  • Low power consumption (< 0.12 W)
  • Output signal: RS485
  • Operating conditions: -40 ÷ +60°C (-40 ÷ +80°C)
  • Power supply: 10÷30Vdc

The sensor for the measurement of atmospheric pressure BAR-QNH is an electronic barometer designed with a special internal circuit for the automatic calculation of QNH, fundamental parameter in the airport. It 'made in accordance to WMO's standard (World Meteorological Organization). The sensor is equipped with an electrical output as RS485 type and a special interface RS485/USB for programming on field of the altitude above sea level.

RSG1 First class Global Güneş Radyasyonu Algılayıcısı

  • Measurement of global solar radiation with thermopile in class I
  • Compliant to ISO9060, WMO and IEC-17025
  • Body in aluminum, sturdy and compact, easy to install
  • Measuring range 0 ÷ 2000W/m2
  • Sensitivity: 10μV/m2
  • Spectral range: 0,3÷3 µm
  • Long-term stability: < ± 1,5%
  • Response to tilt from 0÷90° < ± 2%
  • Uncertainty expected daily: < 5%
  • Output signal: 10µV/W/m2, 0÷2Vdc, 4÷20mA, RS485/Modbus
  • Operating conditions: -40 ÷ +80°C
  • Power supply: 10 ÷ 30Vdc

Sensor for the measurement of Global Solar Radiation (pyranometer) class I with thermopile. Designed to measure the global component of the sunlight on the spectrum 0,3 um - 3um according to the cosine law. Conforms to WMO for environmental monitoring, it is also an ideal instrument for photovoltaic applications according to IEC-9060 and IEC-17025. Quality instrument which, thanks to the different types of electrical outputs (voltage and current) or digital RS485 with ModBus protocol, allows it to be easily interfaced with any acquisition system.

RSG2STD Secondary Standard Global Güneş Radyasyonu Algılayıcısı

  • Measurement of global solar radiation with thermopile in class Secondary Standard
  • Compliant to ISO9060, WMO and IEC-17025
  • Body in aluminum, sturdy and compact, easy to install
  • Measuring range 0 ÷ 2000W/m2
  • Sensitivity: 10μV/m2
  • Spectral range: 0,3÷3 µm
  • Long-term stability: < ± 1,5%
  • Response to tilt from 0÷90° < ± 2%
  • Uncertainty expected daily: < 5%
  • Output signal: 10µV/W/m2, 0÷2Vdc, 4÷20mA, RS485/Modbus
  • Operating conditions: -40 ÷ +80°C
  • Power supply: 10 ÷ 30Vdc

Sensor for the measurement of Global Solar Radiation (pyranometer) class Secondary Standard with thermopile. Designed to measure the global component of the sunlight on the spectrum 0,3 um - 3um according to the cosine law. Conforms to WMO for environmental monitoring, it is also an ideal instrument for photovoltaic applications according to IEC-9060 and IEC-17025. Quality instrument which, thanks to the different types of electrical outputs (voltage and current) or digital RS485 with ModBus protocol, allows it to be easily interfaced with any acquisition system.

LP10 Piezometric Su Seviye Algılayıcısı

  • Level sensor with high precision piezoresistive capsule
  • Automatic compensation of atmospheric pressure
  • Compact design with cap in stainless steel AISI-316
  • Range of measurement: from 1m up to 100m on request
  • Sensitivity: 0.001 bar
  • Accuracy: < 0.1% f.s.
  • Power consumption: < 300mW
  • Output signal: 4 to 20mA
  • Operating conditions: -25 ÷ +70 ° C
  • Power supply: 10 ÷ 25Vdc

Sensor for measuring water level with piezoresistive transducer, suitable for measurements in calm and clear water, for applications such as in underground water, reservoirs or dams. Made of stainless steel is also suitable for marine applications. IP65 with barometric compensation cable and signal cable provided.

LU06 Ultrasonik Su ve Kar Seviye Algılayıcısı

  • Ultrasonic sensor for measuring the water level/snow
  • Conforms to standard WMO
  • Aluminium body IP65 for outdoor applications
  • Piezoelectric measuring system with automatic compensation for temperature
  • Measuring range: 0÷6000mm (0÷10.000 mm on request)
  • Resolution: 1mm
  • Accuracy: 0.1% f.s.
  • Reduced power consumption (< 900mW in reading)
  • Reading very fast (> 1s)
  • Output : 0÷2Vdc, 4÷20mA, RS485/Modbus with MCS module
  • Operating conditions: -25 ÷ +70°C even in corrosive atmosphere.

Ultrasonic level sensor. Applications or as hydrometer or as snow gauge, suitable for outdoor use with high temperature and aggressive atmospheres such as sewers, silos, etc.. Aluminum structure anticorrodal IP65 with automatic temperature compensation. Conforms to WMO for environmental monitoring. Sensor is equipped with electrical protections and available with different signal outputs.

LR Radar Su Seviye Algılayıcısı

  • High precision hydrometer radar
  • Available for different ranges: 15, 20, 30, 75mt
  • Resin body with IP68 protection for outdoor applications
  • Measuring System K-band radar
  • Typical width of the beam: |5°|
  • Accuracy: 0.05% f.s. (± 2mm)
  • Reduced power consumption (< 800mW in reading)
  • Reading very fast (> 1s)
  • Output signal: 4÷20mA (0÷2Vdc or RS485 ModBus with the option MCS)
  • Operating conditions: -40 ÷ +80 ° C
  • Power supply: 10÷28Vdc

The sensor for water level measurement, series VEGAplus is constituted by a transducer for microwave K-band housed in a resin body to IP68 protection. It is an ideal sensor for all applications of water level measurement in open field or in stilling wells, thanks to the narrow beam of microwave beam. Accurate and reliable maintenance-free.

UR Hava Nem Algılayıcısı, URV Fanlı Hava Nem Algılayıcısı

  • Accurate and reliable Air Humidity Sensor with capacity
  • According to WMO standards
  • Anticorodal Aluminum body with size and weight compact
  • Available with forced ventilation (model URV)
  • Range: 0 ÷ 100%Rh
  • Resolution: 0,05%
  • Accuracy: < ±2%
  • Response time: < 10sec (10 ÷ 80%Rh)
  • Operating conditions: : -40 ÷ +80°C
  • Output signal: 0 ÷ 1Vdc, 4 ÷ 20mA, RS485/Modbus
  • Power supply: 10÷30Vdc (consumption with forced ventilation 2W max@12Vdc)

Sensor for measuring air humidity at low consumption (< 0,1W), , compact and sturdy, made of aluminum alloy with anodized to protect against salt air and oxidizing agents. Sensor manufactured according to standard WMO (World Meteorological Organization) Annex.8 for environmental monitoring. Very fast response (< 10s) and accurate measure in full scale. Easy to install and to interface to any datalogger. Sensor is equipped with electrical protections and also with fan. Available in combined version Temperature and Humidity (model UTA)

DATALOGGER TMF100 Multi-function Linux Embedded terminal

  • Linux Datalogger completely programmable via web
  • 4 programmable analogical high-resolution inputs (24Bit)
  • 4 programmable analogical high-resolution inputs (12Bit)
  • 5 programmable frequency inputs up to 2000Hz/channel
  • 4 programmable ON/OFF or frequency outputs
  • 4 programmable 12Bit 0÷2Vdc analogical outputs
  • 2÷6 serial ports RS232, RS485, SDI, 2 USB, 1 lan Ethernet port 10/10Mbits
  • Internal memory from 32MB ÷ 2GB external removable memory (USB)
  • Wide display
  • New version with extremely low power consumption (< 0.2W in “low power” mode)
  • Integrated charge regulator up to 40Ah
  • Communication protocols: Modbus RTU & Tcp, SDI-12, TCP-IP, http, Ftp, Ntp, Telnet, Smtp
  • Data format: ASCII txt file, AES encripted, Synop, Metar, Speci

Compact datalogger with a very low consumption (< 0.2 W), equipped with embedded Linux operating system, fully programmable via Web, with 8 analogical inputs, 5 digital inputs, 4 analogical outputs 0-2Vdc and 4 outputs for relay control. Two (6) serial ports, 2 USB and LAN port 10/100 Ethernet, completes the equipment. Allows viewing of web data in graphical and numerical modes. Easy to install and easy to use thanks to the web interface and the system for fixing to DIN rail. It allows direct interfacing to the ZigBee ZBC wireless module (see accessories) to interface up to 100 wireless sensors. Complete with manual and accessories.

DATALOGGER TMF500 Multi-function Linux Embedded terminal

  • Linux datalogger programmable up to 160 I/O configurable
  • 4÷16 programmable analogical high-resolution inputs (24Bit)
  •  5÷48 programmable frequency inputs up to 2000Hz/channel
  • 1÷100 inputs via RS485, SDI-12
  • 1÷100 radio inputs via ZigBee
  • 2÷6 serial ports, 2 USB, 1 LAN Eth 10/100 Mbits, GPRS
  • 4 analogical output 0÷2Vdc
  • 4÷48 open collector outputs for relay control
  • Internal memory from 32MB ÷ 2GB external removable memory (USB)
  • Wide display and user-friendly alphanumerical keyboard
  • New version with extremely low power consumption (< 0.2W in “low power” mode)
  • Inputs protected from electrical shocks and surges
  • Integrated charge regulator up to 40Ah
  • Communication protocols: Modbus RTU & Tcp, SDI-12, TCP-IP, http, Ftp, Ntp, Telnet, Smtp
  • Data format: ASCII txt file, AES encripted, Synop, Metar, Speci
  • Web interface for programming, data and graphs visualization

Programmable and expandable datalogger up to 160 I/O, ultra-low power (< 0.2W), with inputs and outputs both analogical (24bit) and digital. Equipped with two/six-port RS232/RS485 serial communication, two USB ports, LAN 10/100 Ethernet, internal memory (minimum 32MB) and internal web server. Includes a keyboard for an easy base setup and display data. Easily programmable and configurable directly from Web pages. Embedded Linux operating system on-board. Customizable software and graphics. Possibility of easy software’s customizations. It allows direct interfacing to the ZigBee ZBC wireless module (see accessories) to interface up to 100 wireless sensors. Complete with manual and accessories